South Island Roofing

Metal roofing in Greater Victoria

Metal suits a wet, mossy coast: rain runs straight off and moss has little to hold. It also costs more up front, and the people selling it tend to flatter it. Here are the profiles we install, dated cost ranges from local roofers side by side, and what metal does with South Island rain, wind and snow.

Dark metal roof with a brick chimney against a blue sky
Written quotes,
priced line by line

Standing seam or metal shingles?

Two profiles cover nearly every house we'd put metal on. The Metal Roofing Alliance's style guide shows a wider range, including slate, tile and shake looks, but these two do the work on South Island homes.

Residential metal roof profiles
ProfileWhat it isFastenersWhere it fits
Standing seamLong vertical panels running eave to ridge, joined by raised seams that lock togetherHidden clips under the seams, no screws through the faceSimple rooflines with few valleys; the premium option on price
Metal shingles (shake, slate or shingle look)Pressed steel or aluminum panels shaped to look like traditional roofing; some are stone-coatedVaries by product; ask whether screws are hidden or exposedCharacter houses, and cut-up roofs where long panels would look out of place
Exposed-fastener panelRibbed or corrugated sheets screwed through the faceVisible screws with rubber washersSheds and outbuildings. Shoreline Roofing notes more leak risk at the fasteners over time, and we don't put it on houses.

Steel is the common base metal and costs less. Aluminum resists corrosion better, which Shoreline Roofing points out matters near the water, so for waterfront homes in Oak Bay, Sidney or along the Esquimalt shoreline we price aluminum as an option.

Metal roof cost Victoria BC

As of late 2026, the Victoria roofers that publish metal prices disagree by enough to matter, so here they are side by side. None of these figures is a quote.

  • Per-square-foot prices apply to roof surface, which on a pitched roof is larger than the floor below it.
  • At Forge's standing seam rate, each 1,000 sq ft of roof surface works out to $12,000 to $20,000 or more before extras. A 2,000 sq ft roof would be $24,000 to $40,000 or more.
  • That sits above Shoreline's typical-home range partly because Shoreline's range also covers metal shingles and simpler profiles, which it says land lower than standing seam.
Published metal roofing prices, Greater Victoria, as of late 2026
Source (date)Who they areMetal priceCompared with asphalt
Forge Metal Roofing (2026)Victoria metal roofing companyStanding seam $12 to $20 or more per sq ft installed; corrugated $8 to $14; aluminum and specialty $10 to $18About 1.5 to 1.8 times asphalt up front
Shoreline Roofing (July 2026)Victoria roofer selling both asphalt and metal$18,000 to $35,000 for a typical single-family homeRoughly double an asphalt re-roof
Metal Roofing Alliance (undated)US metal roofing industry groupNo dollar figureRoughly two to three times asphalt

Tear-off of old shingles or cedar shake, new sheathing (the plywood deck under the roof), the number of valleys and chimneys, and steel versus aluminum move your number within those ranges. For the full comparison, see metal vs asphalt roofing; for asphalt prices, see the roof replacement cost guide.

How long a metal roof lasts

A long time, but every lifespan figure comes from someone, and the sources selling metal tend to quote short lives for asphalt. Side by side:

Published lifespan figures for metal and asphalt roofs
SourceWho they areMetalAsphalt
InterNACHI life-expectancy chartHome inspectors' association40 to 80 yearsAbout 20 (3-tab), about 30 (architectural)
Metal Roofing Alliance FAQMetal roofing industry group30 to 50 years or more12 to 20 years
Forge Metal Roofing (2026)Victoria metal roofer40 to 60 (corrugated), 50 to 70 (standing seam)15 to 20 years
Shoreline Roofing (June 2026)Victoria roofer, both materials40 to 50 years or more20 to 25 (standard), 25 to 30 (architectural)

Our reading: metal outlasts asphalt by a wide margin, though not always by the three-to-one some metal sellers suggest. A fair comparison is 40-plus years of metal against 25 to 30 years of well-vented architectural shingles.

Want this priced for your own roof? We send written, itemized quotes.

Get a written quote

Is a metal roof loud in the rain?

Over a solid deck, not by much. McElroy Metal, a metal manufacturer citing acoustic research from LuleƄ University in Sweden, puts rain on asphalt shingles at about 46 dBA and rain on a metal roof at about 52 dBA. Metal over open framing, barn-style with no deck, measured about 61 dBA.

The source sells metal, so weigh the exact numbers accordingly. The structural point holds either way: the deck, the underlayment (the waterproof sheet between deck and metal) and the attic insulation do most of the quieting. We install metal over solid sheathing only.

Moss, wind and snow on the South Island

Moss: Oregon State University's extension guidance says moss doesn't grow easily on metal because the surface is too slippery for it to take root, and lists replacing shingles with metal as an option for roofs that keep growing it. On shaded lots under Garry oaks and firs, that is often the strongest argument for metal.

Wind: the Metal Roofing Alliance says quality metal systems can withstand gusts up to 140 mph (about 225 km/h), and quotes FEMA's advice to use tested systems with proven uplift resistance and the proper clips and fasteners. The rating only holds if the panels are attached the way they were tested, so ask any installer which system they use and whether clip spacing follows the manufacturer's layout.

Snow: Victoria International Airport averages about 40 cm of snowfall spread over 8 days a year in Environment Canada's 1981 to 2010 normals, so load is rarely the issue here. Sliding is. Metal sheds snow in sheets, so over doors, walkways, decks and parking spots we add snow guards, which the MRA notes clip onto standing seams without puncturing the panels.

Metal or asphalt for your house?

Metal makes the most sense if you plan to stay a long time, have a shaded, mossy lot, or are tired of re-roofing every couple of decades. It makes less sense on a short hold, a tight budget with other priorities, or a heritage-designated house, where a change of roofing material needs approval; in the City of Victoria, Council approval.

Ask and we price metal and asphalt side by side on the same written quote. The full comparison is on our metal vs asphalt page, and the quote form gets you numbers for your own roof.

Metal roofing questions

Can a metal roof go over my existing shingles?

Sometimes it can; the Metal Roofing Alliance notes metal is often installed over an existing roof. We prefer a full tear-off, because it lets us check and repair the deck, replace old flashing (the metal that seals chimneys and walls) and start the new roof flat. On a South Island roof that has been wet every winter for decades, seeing the deck is worth the disposal cost.

How long does a metal roof installation take?

Forge Metal Roofing's timeline guide puts a straightforward standing seam job at three to seven working days on site, plus a couple of weeks beforehand for made-to-order panels in your chosen colour and profile. Valleys, chimneys, dormers and rotten deck add time. Your written quote gives the schedule for your roof.

Can metal roofing be installed in winter?

Yes. Forge's guide notes metal can go on through the cooler months because, unlike asphalt shingles, it doesn't rely on warm temperatures to seal. Winter jobs still take more calendar days, because we only open a roof in dry windows, and Victoria's wettest months run November through January.

Steel or aluminum if I live near the ocean?

Aluminum resists corrosion better and is lighter, which Shoreline Roofing points out matters near the water, though it costs more than steel. For homes with salt spray off Haro Strait or Juan de Fuca Strait, we price both and tell you where the difference is worth paying for. Inland, coated steel is the usual choice.

Will a metal roof dent?

It can. Shoreline Roofing notes metal dents from significant hail or falling branches more visibly than shingles would, though damaging hail is uncommon in Victoria. Overhanging limbs are the real risk on treed South Island lots, so trimming them back before the install is worth doing whatever roof you choose.

Do I need a permit to switch from shingles to metal?

It depends on your municipality. Rules on re-roofing differ across Greater Victoria, a change of material can bring a permit into play, and a heritage-designated home in the City of Victoria cannot be altered without Council approval. We confirm with your building department before the job is scheduled, and any permit appears on the quote.

Sources

Figures are dated ranges from these sources, not quotes. Checked November 2026.

  1. Forge Metal Roofing: Roof Replacement Cost Victoria BC 2026 Pricing Guide
  2. Forge Metal Roofing: How Long Does It Take to Replace a Roof?
  3. Shoreline Roofing: Is Metal Roofing Worth It in Victoria? A Straight Answer
  4. Shoreline Roofing: How Much Does a New Roof Cost in Victoria, BC in 2026?
  5. Metal Roofing Alliance: FAQs
  6. Metal Roofing Alliance: Styles
  7. Metal Roofing Alliance: Hurricane & High Winds
  8. Metal Roofing Alliance: Snow & Ice
  9. InterNACHI: Standard Estimated Life Expectancy Chart for Homes
  10. McElroy Metal: Are Metal Roofs Noisy When It Rains or Hails?
  11. Oregon State University Extension: Moss on Roofs and Walkways
  12. Environment and Climate Change Canada: Canadian Climate Normals 1981-2010, Victoria Int'l A (climate ID 1018620)
  13. City of Victoria: Heritage Conservation

Want a written quote for your roof?

Tell us about the roof and where the house is. We reply within one business day, and nothing is booked until you say so.

Request a written quote
Get a written roofing quote